Why 27 feet 6 inches? Redux

In my 28 June 2009 post, I speculated that the A4D's span was set by the 58-ft length of the Essex-class forward elevator after the angled-deck conversion. Too conveniently, 27.5 feet times two plus one-foot clearance between the aircraft and the edge of the elevator equaled 58 feet. What I didn't realize was that the forward elevator was only open to the hangar deck on its aft side, the narrower one, so the Skyhawks loaded athwartships couldn't be moved unless the wheels were on dollies.

The correct loading is shown here and I've also revised the June post.

However, even before I realized my blunder with respect to access to the hangar, I had been bothered as to why the 58-foot long elevator was used as the criteria, since it was the biggest centerline elevator, introduced with the SCB 27A change. Most were smaller. The centerline elevators on the Essex before conversion were 48 feet by 44 feet; those on the Midway class before conversion had a maximum dimension of 54 feet. It turned out that the 27 feet 6 inches was consistent with the original Essex elevators when the aircraft were positioned athwartships and headed at each other. (This was probably established before the slats were reintroduced in the configuration, but since they were easily stowed, the lack of one-foot clearance with the slats extended was not a problem.)

Of course, the Skyhawks still had to be positioned fore and aft on the forward elevator and angled for loading and unloading, but they fit. Note that angling was undesirable because of the extra time it took for positioning and the added risk of a crunch...